|
|
|
|
Our Universal CNC Milling Center
is designed for a broad range of applications on the basis of well-tried technology. With
5 NC axes, it is ideally suited for the most highly efficient 5-sided machining, all the
up to 5-axis simultaneous contouring in no more than two setups. This machine has been
developed further, leading to a pivot speed increase of 40% for the NC swivel rotary table,
which allows much faster tool-changes. By giving the machine 18,000 rpm in the standard
version, High Speed Cutting becomes the machine's technological standard. The capabilities
of the milling center do not end here, however: with 1 g acceleration (9.81 m/s2) in the
linear axes, it reaches its rapid traverse speed of 1,968 ipm in a fraction of a second.
The tool traverses the entire length of all linear paths. The NC swivel rotary table pivots
the work piece around its center of gravity; as a consequence, machining requires no more
than 2 setups.
We can simply machine your parts for less. Please e-mail
of your electronic drawings with quantities and material and we will process your RFQ
quickly. You can always fax your RFQ to 412-828-7280 to attention Sales Department
- Simultaneous 5-axes and 5-sided machining
- Clamp only once, machine all around!
- Acceleration of the linear axes to "1 g"
- Oil/Air lubricated spindle bearing arrangement
- Larger traverse path of the Y axis increases the size of the work space
- 45 degree slants optimize chip flows
- The machine's cast foot provides high stability
- Chip-to-chip times «6s
- High thermal stability of the NC swivel rotary table and the spindle
|
 |
 |
 |
| X axis |
inches |
19.7 |
 |
| Y axis |
inches |
16.5 |
|
|
| Z axis |
inches |
15 |
|
|
| Main drive (AC-Motor
spindle, 100/40% duty cycle) |
hp |
46 |
|
|
| Speed range up to |
rpm |
20-18,000
(30,000) |
|
|
| Feed range |
ipm |
787 |
|
|
| Rapid traverse X/Y/Z |
ipm |
1,968/1,968/1,968 |
|
|
| Tool magazine |
capacity |
32 (60.92) |
|
|
| Tool mounting |
|
CAT 40
(HSK-A 63//HSK 50 E) |
|
|
| Control |
|
MillPlus
IT/iTNC 530/Siemens 840 D powerline) |
|
|
 |
 |
 |
|
|
|
|
|
|